Pipe Guard

Pipe Guard

Great Bay Products Inc. manufactures a sleeve which is used for pipe protection as required by Section 305.1 of the International Plumbing Code 2000, which reads as follows:

"305.1 Corrosion. Pipes passing through concrete or cinder walls or floors or other corrosive material shall be protected against external corrosion by a protective sheathing or wrapping or other means that will withstand any reaction from the lime and acid of concrete, cinder, or other corrosive material. Sheathing or wrapping shall allow for expansion and contraction of piping to prevent any rubbing action. Minimum wall thickness of material shall be 0.025 inch (0.64MM)"
*Pipe Guard .025 Mil Thick

FOR USE WITH CPVC - COPPER - PLASTIC PIPE

Note: 100' in Carton
Our sleeve meets the requirements of both the International and Florida Building Code 305.1.

PART NUMBER ROLL LENGTH FITS PEPE SIZE ROLLS PER CARTON/SKID CARTON/SKID WEIGHT
ESR-RED - 100 100' 1/2" thru 1" 60/SKID 250#
ESR-BLUE - 100 100' 1/2" thru 1" 60/SKID 250#